.png)
How to Install, Program, Operate, and Troubleshoot Telemecanique Altivar 11 with Technical Manual PDF
Telemecanique Altivar 11 Technical Manual PDF
If you are looking for a reliable and versatile variable speed drive controller for your three-phase asynchronous motors, you might want to consider Telemecanique Altivar 11. This product is designed for the global market and has three regional adaptations: North American (U), European (E), and Asian (A). In this article, we will give you an overview of what Telemecanique Altivar 11 is, how to install it, how to program it, how to troubleshoot it, and how to access its technical manual PDF.
telemecanique altivar 11 technical manual pdf
What is Telemecanique Altivar 11?
Telemecanique Altivar 11 is a family of adjustable speed AC drive controllers that are used for controlling three-phase asynchronous motors. The controllers range from:
0.25 to 3 hp (0.37 to 2.2 kW), 208/230/240 V, single-phase input
0.25 to 3 hp (0.37 to 2.2 kW), 208/230/240 V, three-phase input
0.25 to 1 hp (0.37 to 0.75 kW), 100/115/120 V, single-phase input
Telemecanique Altivar 11 has many features and benefits that make it suitable for various applications, such as:
Easy installation and wiring thanks to its compact size and removable terminal blocks
Simple programming and operation thanks to its user-friendly keypad and display
High performance and efficiency thanks to its advanced motor control algorithms and energy saving functions
Flexible configuration and customization thanks to its multiple programming modes and parameters
Enhanced protection and safety thanks to its built-in thermal protection, overload protection, short-circuit protection, ground fault protection, etc.
Reduced noise and harmonics thanks to its PWM switching technology and integrated EMC filter (for European version)
Some of the typical applications of Telemecanique Altivar 11 are:
Fans and blowers
Pumps and compressors
Conveyors and feeders
Mixers and agitators
Lathes and milling machines
Etc.
How to install Telemecanique Altivar 11?
Before installing Telemecanique Altivar 11, you should read and understand its instruction manual carefully. You should also follow all the safety precautions and code requirements with respect to grounding all equipment. Installation, adjustment, repair, and maintenance must be performed by qualified personnel.
The installation steps of Telemecanique Altivar 11 are as follows:
Select a suitable location for the drive controller. It should be away from heat sources, moisture, dust, corrosive gases, etc. It should also have enough space for ventilation and wiring.
Mount the drive controller on a vertical surface using screws or bolts. Make sure the drive controller is securely fixed and level.
Connect the power supply to the drive controller. Use copper wires of appropriate size and type. Refer to the wiring diagrams in the instruction manual for the correct terminals and connections.
Connect the motor to the drive controller. Use copper wires of appropriate size and type. Refer to the wiring diagrams in the instruction manual for the correct terminals and connections.
Connect the control devices to the drive controller. These may include start/stop switches, speed potentiometers, analog inputs, digital inputs, relay outputs, etc. Refer to the wiring diagrams in the instruction manual for the correct terminals and connections.
Install and close all covers before applying power or starting and stopping the drive controller.
How to program Telemecanique Altivar 11?
After installing Telemecanique Altivar 11, you should program it according to your application needs and preferences. You can use the keypad and display on the front panel of the drive controller to access and modify various programming modes, parameters, and functions.
The programming modes of Telemecanique Altivar 11 are:
Standard mode: This mode allows you to adjust the basic settings of the drive controller, such as motor voltage, motor frequency, acceleration time, deceleration time, etc.
Extended mode: This mode allows you to access more advanced settings of the drive controller, such as motor slip compensation, torque boost, energy saving, PID control, etc.
User mode: This mode allows you to customize your own settings of the drive controller by selecting and displaying only the parameters that you need.
The parameters of Telemecanique Altivar 11 are grouped into four categories:
Motor parameters: These parameters define the characteristics of the motor connected to the drive controller, such as rated voltage, rated current, rated frequency, etc.
Application parameters: These parameters define the operating conditions of the drive controller, such as speed reference, acceleration ramp, deceleration ramp, etc.
Function parameters: These parameters define the additional functions of the drive controller, such as jog function, preset speeds, PID function, etc.
Fault parameters: These parameters display the status and history of the faults that occurred in the drive controller, such as overvoltage fault, overcurrent fault, overheating fault, etc.
To program Telemecanique Altivar 11 using the keypad and display, you should follow these steps:
Press MODE until you see STD (standard mode), EXT (extended mode), or USR (user mode) on the display.
Press UP or DOWN until you see the parameter code that you want to modify on the display.
Press ENT to enter the parameter value modification mode. The parameter value will flash on the display.
Press UP or DOWN to change the parameter value. You can also use + or - to increase or decrease the parameter value by 10%.
Press ENT to validate and save the parameter value. The parameter value will stop flashing on the display.
Repeat steps 2 to 5 for other parameters that you want to modify.
Press MODE to exit the programming mode and return to normal operation mode.
Here are some examples and tips for programming Telemecanique Altivar 11:
If you want to change the speed reference from keypad potentiometer to analog input AI1 (0-10 V), you should modify parameter FRS (frequency reference selection) from KPD (keypad) to AI1 (analog input 1) in standard mode.
If you want to enable jog function for forward and reverse directions using digital inputs LI1 and LI2 respectively, you should modify parameter JOG (jog function selection) from NO (no jog) to YES (jog enabled) in extended mode.
## Article with HTML formatting (continued) ), and PS6 (preset speed 6) from 0 to 20, 40, and 60 respectively in extended mode.
If you want to use PID function to control the pressure of a pump using analog input AI2 (4-20 mA) as feedback and analog output AO1 (0-10 V) as output, you should modify parameters PIF (PID function selection), PII (PID input selection), PIO (PID output selection), PIG (PID proportional gain), PII (PID integral time), and PID (PID derivative time) according to your application requirements in extended mode.
If you want to display only the parameters that you need in user mode, you should modify parameter USL (user list selection) from NO (no user list) to YES (user list enabled) in standard mode. Then, you should modify parameter ULC (user list code) by entering a four-digit code that corresponds to the parameters that you want to display in user mode. Refer to the instruction manual for the user list code table.
How to troubleshoot Telemecanique Altivar 11?
Telemecanique Altivar 11 has a built-in fault detection and diagnosis system that helps you to identify and resolve any problems that may occur in the drive controller. If a fault occurs, the drive controller will display an error code on the display and activate a fault relay output. You can use the keypad and display to access and clear the fault parameters.
The fault parameters of Telemecanique Altivar 11 are:
FCS: This parameter displays the current fault code. It can be one of the following codes:
OHF: Overheating fault. The drive controller has detected an excessive temperature rise in its internal components.
OCF: Overcurrent fault. The drive controller has detected an excessive current in its output circuit.
OLF: Overload fault. The drive controller has detected an excessive load on the motor.
OSF: Overspeed fault. The drive controller has detected an excessive speed of the motor.
OPF: Overvoltage fault. The drive controller has detected an excessive voltage in its input or output circuit.
PHF: Phase loss fault. The drive controller has detected a loss of one or more phases in its input or output circuit.
SCF: Short-circuit fault. The drive controller has detected a short-circuit in its output circuit.
SLF: Serial link fault. The drive controller has detected a communication error on its serial link.
INF: Internal fault. The drive controller has detected an internal error in its memory or logic circuit.
FH1: This parameter displays the first historical fault code. It shows the most recent fault that occurred before the current fault.
FH2: This parameter displays the second historical fault code. It shows the second most recent fault that occurred before the current fault.
FH3: This parameter displays the third historical fault code. It shows the third most recent fault that occurred before the current fault.
To troubleshoot Telemecanique Altivar 11 using the keypad and display, you should follow these steps:
Press MODE until you see FCS on the display.
Press UP or DOWN to scroll through the current and historical fault codes.
Refer to the instruction manual for the possible causes and solutions for each fault code.
Correct the cause of the fault and reset the drive controller by pressing STOP/RESET or cycling power.
If the fault persists or recurs, contact your local Telemecanique service center for assistance.
How to access Telemecanique Altivar 11 technical manual PDF?
If you want to access Telemecanique Altivar 11 technical manual PDF, you can download it for free from the official website of Schneider Electric, which is the parent company of Telemecanique. The technical manual PDF contains detailed information and instructions on how to install, program, operate, maintain, and troubleshoot Telemecanique Altivar 11. It also includes wiring diagrams, specifications, dimensions, and accessories for Telemecanique Altivar 11.
To access Telemecanique Altivar 11 technical manual PDF, you should follow these steps:
Go to the website of Schneider Electric at https://www.se.com.
Select your country and language from the drop-down menus at the top of the page.
Click on the Products tab and then click on Variable Speed Drives and Soft Starters.
Click on Altivar 11 under Legacy Products.
Click on Documents and Downloads under Product Information.
Click on Technical Publications under Document Type.
Click on the link that corresponds to the technical manual PDF that you want to download. You can choose from different languages and versions of the manual.
Save the technical manual PDF to your device or print it out for your reference.
Conclusion
Telemecanique Altivar 11 is a great choice for anyone who needs a reliable and versatile variable speed drive controller for their three-phase asynchronous motors. It has many features and benefits that make it suitable for various applications. It is also easy to install, program, operate, and troubleshoot. If you want to learn more about Telemecanique Altivar 11, you can access its technical manual PDF from the official website of Schneider Electric. We hope this article has been helpful and informative for you. Thank you for reading!
FAQs
Q: What is the difference between Telemecanique Altivar 11 and Telemecanique Altivar 12?
A: Telemecanique Altivar 12 is the successor of Telemecanique Altivar 11. It has some improvements and enhancements over Telemecanique Altivar 11, such as a wider power range, a higher switching frequency, a more compact design, a more intuitive user interface, a more robust communication protocol, etc.
Q: How can I control Telemecanique Altivar 11 remotely?
A: You can control Telemecanique Altivar 11 remotely by using a serial link or a Modbus network. You can connect Telemecanique Altivar 11 to a PC, a PLC, or another device that supports serial communication or Modbus protocol. You can use software or commands to send and receive data and instructions to and from Telemecanique Altivar 11.
Q: How can I update the firmware of Telemecanique Altivar 11?
A: You can update the firmware of Telemecanique Altivar 11 by using a PC and a serial cable. You can download the latest firmware version from the website of Schneider Electric. You can use software or commands to transfer the firmware file to Telemecanique Altivar 11. You should follow the instructions in the instruction manual carefully when updating the firmware of Telemecanique Altivar 11.
Q: How can I reset Telemecanique Altivar 11 to factory settings?
A: You can reset Telemecanique Altivar 11 to factory settings by using the keypad and display. You should press MODE until you see FCS on the display. Then, you should press ENT for more than 5 seconds until you see FCS flashing on the display. Then, you should press ENT again to confirm the reset. This will erase all the user settings and restore the default settings of Telemecanique Altivar 11.
Q: Where can I buy Telemecanique Altivar 11?
A: You can buy Telemecanique Altivar 11 from authorized distributors or online retailers of Schneider Electric. You can also contact Schneider Electric directly for more information on how to buy Telemecanique Altivar 11.
71b2f0854b